All For Reef

Tropic Marin All-For-Reef is a revolutionary approach to dosing, combining calcium, alkalinity, and other trace elements into a single, easy to use solution. It's no longer necessary to maintain two, three, or four solutions, or a complicated reactor. All-For-Reef is a balanced source of calcium and carbonate hardness, released through natural biological processes, along with a mix of trace elements. No mixing, no gas cylinders, no fuss. 

Features

• Complete single solution
• No byproducts (e.g. sodium chloride)
• No excess carbon dioxide
• Dosing pump ready
• No mixing required
• Doesn't alter salinity or ionic balance

Three Sizes Available:

• 250mL
• 500mL
• 1000mL

Specifications (per 500 mL)

• Carbonate Hardness Concentration: 2,800 dKH
• Calcium Concentration: 20,000 mg Ca
• Magnesium Concentration: 950 mg Mg

In addition to the calcium, alkalinity, and magnesium, All-For-Reef comes pre-mixed with the same elements used in their Trace A and Trace K

• A- ELEMENTS - contains anions of the trace elements bromine, fluorine, iodine, lithium, molybdenum, selenium and vanadium in pure mineral form
• K+ ELEMENTS - contains cations of the trace elements barium, chrome, cobalt, iron, copper, manganese, nickel, strontium and zinc in pure mineral form

Instructions:

Start with a daily dose of 5 ml of All-For-Reef per 100 liters (26 US-gal) of aquarium system volume. Increase the daily dosage – by continuous control of the alkalinity – weekly by 2.5 ml per 100 liters (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9 °dH is reached.

Do not exceed a maximum daily dose of 25 ml of All-For-Reef per 100 liters (26 US-gal) of aquarium system volume.

To mix All-For-Reef Powder, you need to

1. Fill a clean mixing container with 1 liter of RO/DI water. Moderately warm water helps dissolve the powder faster.
2. Measure 6 level measuring spoons (160 grams) of All-For-Reef powder.
3. Slowly dissolve the AFR powder into 1 liter of RO/DI water. Mix one spoonful at a time, stirring constantly.
4. Keep stirring until the solution is clear indicating the AFR powder is completely dissolved.
5. Once powder is fully dissolved, the solution is ready for dosing.